Sartorius Stedim Biotech CERTOMAT BS-T Mode D'emploi page 94

F4
MODE
•
The respective "active" program is indicated, here "PROG1".
• In pressing the [START] key afterwards you change to the operating mode "RUN".
The program activated before is processed.
•
With the [F5] key you can alternately change to another display field in order to indicate all actual values!
HEAT COOL
OFF OFF
< - >
Fig. 30: RUN: operating mode
•
At the TIME-display the rest operating time of a "STEP" is indicated.
During the "PRSTEP" processing no time is indicated (display "PRSTEP").
•
In the operating mode the ACTUAL VALUES are indicated and the started program runs automatically.
•
In pressing the respective function keys the SET VALUE is indicated.
•
After having released the function key the ACTUAL VALUES are indicated again.
• In pressing the [STOP] key you jump back to the program menu "PROG". Heating, cooling, light and shaking drive
are switched off.
The program processing is stopped.
It is indicated during the program processing which program and which "STEP" are being processed at the moment, e. g.:
RUN 1,1
STEP1
Programm 1
•
For the programs "PROG2-PROG5" the set-ups are used analogously to the description for program 1 "PROG1".
24
F5
MODE
LIGHT
OFF
RUN 1,1
RUN 2,-
inactive
Display field
< F5 >
SPEED
130
10:25
TIME
Fig. 31: RUN: operating mode
PRSTEP OFF
Programm 2
TEMP1
13.8°C
< - > RUN 1,1
RUN 2,P
PRSTEP ON
Programm 2