Sartorius Stedim Biotech CERTOMAT BS-T Mode D'emploi page 72

Introductionary Note
This Operating Manual for the Incubator Shaking
Cabinet CERTOMAT ® BS-T refers to the design and
equipment features of this device at the date of print
given with the Rev. No. in the bottom line. The
information included in this Operating Manual has
been carefully estimated and checked. However, no
guarantee can be given with respect to completeness
and correctness of this information. Sartorius Stedim
Biotech GmbH reserves the right to modify the
equipment of its products as well as the documentation
without notice.
Due to the continuous development of the units it may
be possible that different building components or their
use are not described. There may be information which
does not apply to your device. If you find missing,
misleading or wrong information or if you should wish
additional information about different building
components please send us a note.
The CERTOMAT ® BS-T is just an example of laboratory
equipment products from the Sartorius Stedim Biotech
GmbH. Our range of equipment includes shakers and
incubator shakers, centrifuges, ultrapure water systems,
air samplers and fermenters/bioreactors.
You will find further information on our homepage
www.sartorius-stedim.com
If you are interested in more information about the
complete product program or about specific equipment,
please contact us.
Sartorius Stedim Biotech GmbH
August-Spindler-Straße 11
37079 Göttingen, Germany
Telephone +49.551.308.3118
Telefax +49.551.308.3918
info@sartorius-stedim.com
www.sartorius-stedim.com
EG-Declaration of Conformity
With the Statement of Conformity, which is attached or
which accompanies the equipment, Stedim Biotech
GmbH confirms the conformance of the
CERTOMAT ® BS-T with the specified guidelines.
2
General Safety Notes
•
Laboratory seniors or the persons responsible for the use
of the equipment must inform the personnel about the
dangers at the operation of the CERTOMAT ® BS-T.
Furthermore they have to guarantee that the relevant
safety conditions are observed. The personnel must have
the necessary qualification for the operation of the
equipment and its handling.
•
Please take special care regarding the operating
information. Improper use of the unit is thus avoided
and you have full claim for guarantee. Please contact us
if you have questions.
Steps to be carried out with special care or special
aspects or special issues to be considered are marked as
this paragraph.
Important safety notes in this manual are marked with
this symbol. Such instructions apply in addition to the
other safety instructions for the field of application and
for the working place.
•
Do not use devices with the wrong potential version.
•
Disregard of the safety instructions may for example
result in damages at the equipment or can cause other
material and eventually also person damages.
Guide through this manual
This Operating Manual is organized systematically.
Depending on your knowledge of the device you can
start from the beginning or go directly to the chapter of
your interest.
•
Section 1 gives an overview on design and function of
the equipment of the shaking box.
•
Section 2 describes the preparatory measures which are
required for installation at the working place.
Furthermore the installation and the connection of the
unit are explained.
•
Section 3 includes the operating information. If the
equipment is installed ready for use or if you are used to
the CERTOMAT ® BS-T, respectively, you can go straight
on to this section.
•
Section 4 is a summary of all important technical data
and includes ordering information of optional equipment
and accessories for the shaker.