Sartorius Stedim Biotech CERTOMAT BS-T Mode D'emploi page 88

F4
•
After the pressing of [F4] the cooling is switched on / off.
Switching the cooling on is only possible at temperature set values <38.5 °C!
If a higher temperature value is entered and confirmed by pressing [ENTER] while the refrigerator is on,
a brief signal sounds and the refrigerator will be switched off.
MODE
•
The respective "active" STEP is indicated.
•
With the [F5] key you can alternately change to another display field in order to set up further parameters (only at option
„illumination".
SPEED
0
OFF
COOL
Fig. 17: adjustable parameters
F2
•
After the pressing of [F2] the illumination is switched on / off.
MODE
•
The respective "active" STEP is indicated, here "STEP1"
18
COOLING:
MODE:
<
TEMP TIME
10.0°C 00:00
< - > STEP1
LIGHT:
MODE:
Switching the cooling on and off (only at "UHK version")
Display field
F5 >
Fig. 18: further set-up possibilities
Switching the illumination on and off
(only at "option illumination")
Display field
LIGHT
ON
< - > STEP1