Main" Function; 5.1 Functional Elements Of The "Main" Menu; 5.2 Starting An Incubation From The "Main" Menu; 5.2.1 Entering The Temperature - Sartorius Stedim Biotech CERTOMAT Tplus Mode D'emploi

5

"Main" Function

Fast access to all controllers (TEMP, SHAKER) and
switches (LIGHT, ILLUM, COOL) is obtained via the
"Main" function key in the footer. After pressing the
key an overview menu appears first.
Then open the controller operating images (TEMP,
SHAKER) and the switches (LIGHT, ILLUM, COOL) by
pressing the functional element.
Fig. 20: "Main" menu of the CERTOMAT® Tplus
5.1 Functional Elements of the "Main" Menu
Key, Symbol
22
Meaning, Use
• Measured temperature value
in the CERTOMAT® Tplus
− Input of the temperature set
value
− Operating mode selection for
TEMP controller
− Continue with the controller
menu
• Shaker speed [rpm]
− Input of the set value for the
shaker speed
− Operating mode selection for
SHAKER controller
− Continue with the SHAKER
controller menu
• Working light
ON / OFF
− Manual operation only
• Photo illumination ON / OFF
− Can be switched manually
− Can be switched by program
control
• Cooling ON / OFF
− Can be switched manually
− Can be switched by program
control
5.2 Starting an Incubation from the "Main" Menu
In order to start an incubation from the "Main" menu,
proceed as follows.
Beispiel:
• The following operating values are specified:
− Temperature:
− Speed:
− Working light:
− Photo illumination:
− Cooling:

5.2.1 Entering the Temperature

• Press the "TEMP" key.
The input menu of the temperature controller appears.
Fig. 21: "Controller TEMP" menu
• Enter the temperature (37 °C) via the screen keypad,
set the "Mode" to "auto" and confirm with "ok".
37 °C
50 rpm.
OFF
ON
OFF
The heating mode starts.
The "TEMP" key shows the green
underline for operating mode
"auto" and the entered
temperature (37 °C) is displayed