Télécharger Imprimer la page

EUROM 342185 Manuel D'utilisation page 37

Radiateur mural céramique
Masquer les pouces Voir aussi pour 342185:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 39
entering the data into the Smart Timer. The Smart Timer data is not visible on
the heater. Regularly check in the App whether the entered Smart Timer data
are still correct.
You can consult an elaborate Eurom Smart App user manual with the QR code
or on the website: http://www.eurom.nl/nl/manuals
Timer:
The Wall Designheat 2000 Wifi has a timer function that can be used with the app.
Overheating safeguard
In case of internal overheating, the overheating safeguard will switch the heater
off. This may occur if the heater cannot give off enough heat or if it cannot draw in
enough fresh air. As mentioned above, this is generally caused by (partially)
covering the heater, obstructing the air intake and/or outlet grills or installing the
heater too close to a wall or ceiling or something similar. When the heater has
cooled down sufficiently, it will in principle start again automatically, however if you
do not remove the cause of the cut-off then this will probably be repeated. Regular
overheating can give rise to irreparable damage. If the overheating protection
switches the heater off, then you must set the main switch to OFF (O), unplug and
allow the heater to cool down. Remove and/or amend the cause of overheating and
reuse the heater as normal. If you cannot find a cause and overheating recurs, stop
using the heater, and take it in for inspection/repair.
Cleaning and maintenance
Keep the heater clean. Deposits of dust and dirt in the appliance are a common
cause of overheating so these should be removed regularly. Switch off the heater,
remove the plug from the socket and allow the heater to cool down before cleaning
or carrying out maintenance work.
Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do
not use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or
chemical solutions!
Using a vacuum cleaner, carefully remove any dust and dirt from the grills and
ensure that the air intake and outlet openings are clean. Be careful not to touch
or damage any internal parts during cleaning!
The heater contains no other parts which need maintenance.
below:
37

Publicité

loading

Ce manuel est également adapté pour:

342178Wall designheat 2000 wifiSw486892