CASO DESIGN VRH 690 advanced Mode D'emploi Original page 34

14.3 Sources of danger
14.3.1 Danger of burns
Warning
The sealing bar gets very hot. Please observe the following
safety notice in order not to burn yourself or others.
► To avoid getting burned, never touch the sealing bar directly
after sealing process.
14.3.2 Danger of fire
Warning
There is a danger of fire due to the event the device is not
used properly. Observe the following safety notices to
avoid dangers of fire:
► Do not set up the device near flammable material.
► Keep this appliance away from sources of heat (gas, electric,
burner, heated oven).
14.3.3 Dangers due to electrical power
Danger
Mortal danger due to electrical power!
Mortal danger exists when coming into contact with live
wires or subassemblies! Observe the following safety notices
to avoid dangers due to electrical power:
► Do not operate this device if it has a damaged cable or plug,
if it is not working properly or if it has been damaged or
dropped. If the power cable or plug are damaged, then they
must be replaced by the manufacturer or its service agent in
order to avoid a hazard.
► Do not open the housing on the device under any
circumstances. There is a danger of an electrical shock if live
connections are touched and the electrical or mechanical
structure is altered. In addition, functional faults on the device
can also occur.
34