Samsung DVD-R150 Manuel De L'utilisateur page 37

Record Mode SP (02:12)
DV
The DV device is connected.
MOVE OK RETURN
■
You can not change the recording mode and the PROG while
recording.
■
Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc, and up
to 48 titles onto a DVD+RW/+R disc.
■
Recording will stop automatically if there is no free space left for
recording.
■
Recording will stop automatically if a copy protected image is
selected.
■
DVD-RAM/DVD±RW/DVD+R discs must be formatted before starting
to record. Most new discs are sold unformatted.
■
Do not use DVD-R authoring discs with this DVD Recorder.
Copying from a Camcorder
You may control the Camcorder using the IEEE1394 (DV) interface.
Before you start
Check that the disc has enough available space for the recording.
Adjust the recording mode.
1. Press the OPEN/CLOSE button, place a recordable disc on the disc tray.
2. Press the OPEN/CLOSE button to close the disc tray.
Wait until "LOAD" disappears from the front panel display.
3. Press the REC MODE button repeatedly to select the recording speed
(quality).
SP LP EP XP
4. Press the INPUT SEL. button to select DV.
If the input is set to DV, a playback/record menu that enables camcorder
control appears on the top of the screen.
5. To play the camcorder and fi nd the starting point to be copied, select the
) on the top of the screen using the ◄ ► buttons and then
play icon (
press the OK button.
6. To start recording, select the record icon (
the ◄ ► buttons and then press the OK button.
You can also use the REC button on the remote control to start recording. (If
your camcorder is in stop mode, the REC button doesn't work.)
To stop recording
Press the STOP button to stop or fi nish a recording in progress.
• When using DVD-RAM/DVD±RW/DVD±R discs, the message "Updating the
disc information. Please wait for a moment. " is displayed.
English - 37
DVD-R155 only
) on the top of the screen using