Samsung DVD-R150 Manuel De L'utilisateur page 22

Auto Channel Memory
17%
Stop
DVD-Recorder
Auto Setup
No Disc
Date Time
JAN 01 2007 12 00
MON
MOVE OK RETURN
DVD-Recorder Clock Set
No Disc
Programme
Setup
Date Time
JAN 01 2007 12 00
MON
MOVE OK RETURN EXIT
6. Auto Channel scan will be started.
• The number of stations automatically stored by the DVD Recorder depends
on the number of stations that it has found.
7. Check the date and time.
• if it is : Correct, press the OK button then the date and time will be saved.
If you don't press the OK button, the date and time will be saved
automatically after 5 seconds.
• if it is : Incorrect, input correct Time, Date, Year using ▲▼◄ ► buttons or
number buttons. Press the OK button then the date and time will be saved.
When you need to change clock setting, you can set up it manually.
■
Now, DVD Recorder is ready for use. Function for "Plug & Auto Setup" is
fi xed already. So if you want to change this fi xed one, you can change
it by Presetting the Stations in OSD "Presetting Channels with the
Manual setup function" menu. (see page 23)
Setting the Clock
This menu is used to set the current time.
You need to set the time to use timer recording.
1. With the DVD Recorder in Stop mode/No Disc mode, press the MENU
button.
2. Press the ▲▼ buttons to select Setup, then press the OK or ► button.
3. Press the ▲▼ buttons to select Clock Set, then press the OK or ► button.
Use the ▲▼◄ ► buttons to input Time, Date or Year. Use number buttons
to input clock data directly.
4. Press the OK button, then the date and time will be saved.
If you don't press the OK button, it will not be saved.
English - 22