Panasonic AW-RP605P Manuel D'utilisation page 40

Setting menus
SPEED WITH ZOOM POS. (OFF, 1, 2)
When 1 or 2 is selected as this item's setting, the pan-tilt
operation of the pan-tilt head system is slowed down so that
the pan-tilt position will be more easily aligned when the
lens zoom is at the wide-angle position.
DIAGONAL MOTION (ON/OFF)
OFF : The pan-tilt head system moves to the position set in
the preset memory at maximum speed.
ON : The speed at which the pan-tilt head system moves
is adjusted so that it will move to the position set in
the preset memory in a straight line.
However, repeatability with the AW-PH350 pan-tilt
head will be ±10´, resulting in lower stopping
accuracy.
DIAGONAL SPEED (1 to 30)
This item is used to select the speed at which the pan-tilt
head system is to operate when DIAGONAL MOTION item
has been set to ON. The higher the value set, the faster the
speed at which the pan-tilt head will operate.
When DIAGONAL MOTION item has been set to OFF,
operational speed cannot be set.
<Note>
The DIAGONAL MOTION and DIAGONAL SPEED items
appear when the AW-PH350 is used as the pan-tilt head.
CAMERA SETTING menu
The operation items differ depending on the type of camera
or pan-tilt head used and the optional card installed.
For further details, refer to the operating instructions of the
camera used.
40