Panasonic AW-RP605P Manuel D'utilisation page 36

Setting menus
G/L SETTING
CABLE LENGTH
H PHASE
J
SC PHASE
J
CABLE COMP
CABLE COMP AUTO
CABLE COMP MANUAL (Y, C)
J
CABLE COMP MANUAL (Y Level)
J
CABLE COMP MANUAL (f Response)
J
CONTROLLER SETTING
SIGNAL SELECT
BUZZER SET
EXT CONTROL OUT
COMPONENT
MEMORY LENGTH
HEAD SW (R) FUNCTION
VIRTUAL STUDIO MODE
P/T SETTING
PAN DIRECTION
TILT DIRECTION
ZOOM DIRECTION
FOCUS DIRECTION
IRIS DIRECTION
SPEED SELECT (PAN)
SPEED SELECT (TILT)
SPEED SELECT (ZOOM)
SPEED SELECT (FOCUS)
SPEED WITH ZOOM POS.
DIAGONAL MOTION
DIAGONAL SPEED
<Notes>
OThe factory settings are indicated in parentheses.
OIt is possible to switch the speed at which the setting value of the items marked with J changes each time the jog dial is pressed.
Note that this function may not work with the AW-RP615 Control Panel (optional accessory).
[SHORT]
[± 0]
[COARSE: 1, FINE: ± 0]
With the COARSE setting, it is not possible to switch the speed
at which the setting value changes when the jog dial is pressed.
[C. VIDEO5C. VIDEO]
[ON]
[OFF]
[Y/Pr/Pb] 4
[PAL OUTPUT SIGNAL]
The COMPONENT item appears when an RGB card (AW-PB302)
[30s]
has been installed in the OPTION CARD slot.
[OFF]
[OFF]
[NORMAL]
[NORMAL]
[NORMAL]
[NORMAL]
[NORMAL]
[HIGH: FAST, LOW: FAST]
[HIGH: FAST, LOW: FAST]
[HIGH: FAST, LOW: FAST]
[HIGH: FAST, LOW: FAST]
[OFF]
[OFF]
[30]
36