Scheppach 19013 03901 Guide D'utilisation page 20

Manufacturer:
Scheppach Fabrikation von
Holzbearbeitungsmaschinen GmbH
D-89335 Ichenhausen
General notes
• After unpacking, check all parts for any transport
damage. Inform the supplier immediately of any faults
• Later complaints cannot be cosidered
• Make sure the delivery is complete
• Before putting into operation, familiarize yourself with
the machine by carefully reading these instructions.
• Use only original scheppach accessoires, wearing or
replacement parts. You can find replacement parts at
your scheppach dealer
• When ordering, include our item number and the type
and the year of construction of the machine.
Note
In accordance with valid product liability laws, the
manufacturer of this device shall not be responsible
for damage to and from this device wh ich results
from:
• Improper care.
• Noncompliance with the Operating Instructions.
• Repairs made by unauthorized persons.
• The installation and use of any parts which are not
original scheppach replacement parts.
• Improper use and application.
• Failure of the electrical system as a result of noncom
pliance with the legal and applicable electrical
directives and VDE regulations 0100, DIN 57113 /
VDE 0113.
We recommend
that you read trough the entire operating instructions
before putting into operation
These operating instructions are to assist you in
getting to know your machine and utilize its proper
applications.
The operating instructions contain important notes on
how you work with the machine safely, expertly, and
economically, and how you can avoid hazards, save repair
costs, reduce downtime and increase the reliability and
service life of the machine.
In addition to the safety requirements contained in these
operating instructions, you must be careful to observe
your country's applicable regulations.
The operating instructions must always be near the ma-
chine. Put them in a plastic folder to protect them from
dirt and humidity. They must be read by every operator
before beginning work and observed conscientiously. Only
persons who have been trained in the use of the machine
and have been informed of the various dangers may work
with the machine. The required minimum age must be
observed.
In addition to the safety requirements contained in these
operating instructions and your country's applicable
regulations, you should observe the generally recognized
technical rules concerning the operation of woodworking
machines.
Contents Page
12 english
All manuals and user guides at all-guides.com
Contents
General notes
Safety notes
Use only as authorized
Remaining hazards
Extent of delivery
Technical data
Assembly
Erecting and adjusting
Putting into operation
Maintenance
Electrical connection
Notes on working
Special accessories
Trouble-shooting plan
EC declaration of conformity
Spare parts list
Guarantee
Safety notes
In these operating instructions we have
marked the places that have to do with
your safety with this sign.
• Please pass on safety notes and instructions to all
those who work on the machine.
• The machine has been built in accordance with
state-of-the-art standards and the recognized
safety rules. Nevertheless, its use may constitue a
risk to life and limb of the user or of third parties,
or cause damage to the machine and to other
material property.
• Before the machine is put into operation it must
be connected to a dust extractor with a flexible,
non-flammable suction hose. The suction should
switch on automatically when the machine is switched
on.
• Observe all safety instructions and warnings attached to
the machine.
• See to it that safety instructions and warnings
attached to the machine are always complete and
perfectly legible.
• Caution when working: There is a danger to
fingers and hands from the rotating cutting tool.
• Check all power supply lines. Do not use defective
lines.
• lnsure that the saw bench is set up in a stable
position on firm ground.
• Keep children away from the machine when it is
connected to the power supply.
• Operating personal must be at least 18 years of
age. Trainees must be at least 16 years of age,
but may only operate the machine under adult
supervision .
• Persons working on the machine may not be diverted
from their work
• The working space on the machine must be free of
chips and wood scraps
• Note the rotating direction of the motor and
circular saw blade. See remarks „Electrical
connection" (wall socket).
• Fit only sharp, crack­free and undistorted circular
saw blades.