Optelec ClearView GO Manuel D'utilisation page 19

All manuals and user guides at all-guides.com
Optelec ClearView GO
 Wheel
: Move the position of the Line & Masks.
1) Counterclockwise 2) Clockwise
5.2. Battery status
The status of the remaining battery power is not normally displayed.
The battery charging icon will be displayed when the power adapter is
connected.
You can turn on or off the status of the remaining battery power by
pressing the Snap shot button (③) for 3 seconds or more.
5.3 Power saving mode
If you leave the unit turned on and unused for 10 minutes, it
automatically goes into the Power saving mode. If the unit is left for 3
minutes after entering the Power saving mode, power is automatically
switched off.
5.4 Color mode selection
Press and hold the color mode button (⑤) and rotate the Zoom wheel
(④) to cycle through the available color modes.
English 18