Optelec ClearView GO Manuel D'utilisation page 21

All manuals and user guides at all-guides.com
Optelec ClearView GO
5.7. Menu
Press and hold the center of the Zoom wheel (④) to enter the menu
mode. In Menu mode, you can change the settings of the following
functions.
Color mode
In this menu item, you can add or remove your preferred color modes
(max 35 modes). You can also personalize your own color setting.
Power saving mode
In this menu item, you can adjust the time before entering power saving
mode. The default setting time is 10 minutes.
Adjusting the magnification range
In this menu item, you can set the magnification range. The default
magnification range is 2.0 x ~ 32 x.
LED brightness
In this menu item, you can adjust the LED brightness.
Reset
In this menu item, you can reset all settings back to default values.
English 20