Nilfisk Liberty SC50 UVGI Mode D'emploi page 12

A - ENGLISH
TECHNICAL SPECIFICATIONS
Manufactured under EPA Registration Number 97307-PA-1.
UVGI Module Specifications
Power Input = 300 watt @ 24 VDC
IP-X5 Rating (Splash / spray resistant)
Integrated Thermal management circuitry
Redundant UV-C-stable shielding
Electrical interlock to prevent bulb activation during removal / unauthorized manipulation
Bulb Specifications
Custom Engineered Amalgam UVC Emitters
Lamp input power 92 W Each (3 total)
Lamp Voltage 44 V
UV flux @ 254 nm (100hr) 30 W per emitter
254 nm irradiance @ 1 m 170 μW/cm2
Average rated lifetime 16,000 hrs (derated to 12,000 hrs for managed intensity levels)
Splash / Shatter protective film coating
BROKEN UV BULB & DISPOSAL
CAUTION!
This device contains compact fluorescent light (CFL) bulbs which contain a small amount of mercury. Proper handling
and disposal is required at specialized processing facilities. The bulbs in these devices are very similar to fluorescent
lights used in homes or work places, but produce ultraviolet (UV) instead of visible light. Search your local area for
additional information.
Should a bulb break, here are guidelines for cleanup →
Disposal:
Equipment marked with the crossed-out wheeled bin symbol indicates that
used electrical and electronic equipment should not be discarded together
with unseparated household waste. To avoid negative effects on human
health and the environment the equipment must be collected separately at
the designated collection points.
Users of electrical and electronic household equipment must use the
municipal collection schemes. Please note that commercially used electrical
and electronic equipment, shall not be disposed of via municipal collection
schemes. We will be pleased to inform you about suitable disposal options.
A - 12
INSTRUCTIONS FOR USE
Nilfisk Liberty SC50 UVGI - 56091240
https://www.epa.gov/cfl/cleaning-broken-cfl
7/2020