Abicor Binzel ABIMIG 0 Série Mode D'emploi page 23

®
ABIMIG XX0/XX5
®
4.2 ABIMIG XX5/XX5 T product range
®
4.3 ABIMIG A XX5 GRIP LW product range
®
4.4 ABIMIG A T XX5 LW product range
• 3 handle sizes available depending on torch size
• Torch series equipped with fixed standard torch necks
• Torch series T with changing neck system and neck types T, T8, TM and
T8M in different lengths
• Machine torch series equipped with fixed standard straight and bent torch
necks
®
• BIKOX Cu cable assembly
• All torch sizes 3, 4 and 5 m in length are equipped with machine
connection KZ-2
• Tip adapter connected to the torch tube with right-handed thread without
counter nut
• 3 handle sizes available depending on torch size
• Torch series equipped with fixed standard torch necks
• Torch series T with changing neck system and neck types T, T8, TM and
T8M in different lengths
• Machine torch series with basic torch and changing neck system
®
• BIKOX Cu cable assembly
"low weight" product range
• All torch sizes 3, 4 and 5 m in length are equipped with machine
connection KZ-2
• Tip adapter connected to the torch tube with right-handed thread without
counter nut
• 2 GRIP handle sizes available with b.j. cable support
• Torch series equipped with fixed standard torch necks
"low weight" product range
• Tip adapter connected to the torch tube with right-handed thread without
counter nut
• Ergonomically shaped handle in 2-component technology with rubber
inserts for increased grip safety
• Handle equipped with b.j. cable support and integrated up/down
• all torches equipped with changing neck system and neck types T, T8, TM
and T8M in different lengths
4 Configuration of the torch product ranges
EN - 7