Manual Operation - geo-FENNEL Selection PRO Série Mode D'emploi

EN
In case one of the arrow buttons (left or right) is used during the tracking procedu-
re same will re-start from the beginning.
Note:
When the laser line is already in the receiving window of the receiver and an
arrow button is used the tracking direction of the base will change.
In order to save battery power the base can be switched off when the tracking
procedure is finished.
Note:
If the instrument is not operated for more than 10 minutes the base will automati-
cally switch off (in order to save battery power).

MANUAL OPERATION

The rotation can also be controlled manually. The receiver is then used as remote
control.
Press the AUTO button to switch off the automatic tracking function. Now the
base can be rotated with the right or left arrow button. If the buttons are pressed
longer the rotation speed of the base will increase.
32