Nilfisk Advance ecoflex SC500 Instructions D'utilisation page 73

(**) As described in the Use chapter, set the machine and the on-board battery charger (where fitted) on the basis of the type of
battery to be installed by modifying the BAT parameter from the table below:
Installed battery type
WET
GEL / AGM
GEL EXIDE
GEL OPTIMA
GEL DISCOVER
GEL FULLRIVER
Alarms log screen (G, Fig. 8)
This function allows you to check for any stored alarms on the
machine.
Use this function only with support from a Nilfisk Service Centre
to solve any operating problems.
To return to the main screen (E, Fig. 7), press push-button (A)
repeatedly.
Operating Time Counter Screen (H, Fig. 9)
This function allows you to check the total accumulated hours of
work for each machine subsystem:
– TOTAL counter (machine running time)
– DRIVE counter (drive system usage time)
– BRUSH counter (brush rotation system usage time)
– VACUUM counter (vacuum system usage time)
To return to the main screen (E, Fig. 7), press push-button (A).
11/14
INSTRUCTIONS FOR USE
Wet cell batteries
Generic GEL or AGM batteries
EXIDE /SONNENSHINE brand GEL batteries
®
OPTIMA™ brand GEL batteries
DISCOVER brand GEL batteries
®
FULLRIVER brand GEL batteries
®
Value
G
Figure 8
H
Figure 9
9099974000 - SC500
ENGLISH
0
1
2
3
4
5
A
P100848
A
P100849
19