Speaker Layouts For Dolby Virtual Speaker - Teac AG-7D Manuel Du Propriétaire

1
2
2SPK (REF)
3SPK (REF)
Black: physically existent speakers
White: Virtual speakers
Noir: Enceintes existant physiquement
Blanc: Enceintes virtuelles
Negro: Altavoces físicamente existentes
Blanco: Altavoces virtuales
64

Speaker Layouts for Dolby Virtual Speaker

Dolby Virtual Speaker technology virtualizes the missing
speakers; in Wide mode, it virtualizes the necessary speakers and
enhances the surround experience.
There are four speaker layouts for Dolby Virtual Speaker.
1
2
2SPK (WIDE)
< DVS 4SPK and DVS 5SPK is available for DOLBY VS Wide
3SPK (WIDE)
4SPK (WIDE)
5SPK (WIDE)
Select DOLBY VS REF or DOLBY VS WIDE mode by
pressing the DSP button.
Press the PARAMETER button to change the setting.
Each time the PARAMETER button is pressed, the setting is
changed as follows:
DVS 2SPK (2-Speaker Layout)
Select this when only two speakers (Front L/R) are available.
The missing speakers (Center and Surround L/R) will be
virtualized.
DVS 3SPK (3-Speaker Layout)
Select this when three speakers (Front L/R and Center) are
available.
The missing speakers (Surround L/R) will be virtualized.
DVS 4SPK (4-Speaker Layout)
Select this when four speakers (Front L/R and Surround L/R)
are available.
The missing speaker (Center) will be virtualized.
DVS 5SPK (5-Speaker Layout)
Select this when five speakers (Front L/R, Center and
Surround L/R) are available.
Dolby Virtual Speaker technology enhances the surround
experience.
mode only.
ENGLISH