Dolby Pro Logic Iix Music Parameters - Teac AG-7D Manuel Du Propriétaire

3
1
2
3
62
1 2

DOLBY PRO LOGIC IIx MUSIC parameters

You can adjust the parameters for DOLBY PRO LOGIC IIx MUSIC.
1 Select DOLBY PRO LOGIC IIx MUSIC mode by pressing
the DSP button.
2 Select the parameter to be changed by pressing the
PARAMETER button.
Each time the PARAMETER button is pressed, the parameter is
changed as follows:
PANO
3
Within 8 seconds, press the SELECT button to change
the value.
PANO (panorama):
This mode extends the front stereo image to include the
surround speakers for an exciting wraparound effect with
side wall imaging. Select "ON" or "OFF".
The default setting is "OFF".
C-WID (center width control):
This adjusts the center image so it may be heard only from
the center speaker, only from the left/right speakers as a
phantom image, or from all three front speakers to varying
degrees.
The adjustable range is from 0 to 7. The default setting is
"0".
DIMEN (dimension control):
This adjusts the sound-field either towards the front or
towards the rear. The adjustable range is from –4 to +2. The
default setting is "–1".
Repeat step 2 and 3 to adjust other parameters.
When all the configurations have been finished, leave the unit
for 8 seconds to exit.
ENGLISH
C-WID DIMEN