SilverCrest SMS 300 A1 Mode D'emploi Et Consignes De Sécurité page 36

Changing the UV-C lamp
WARNING! RISK OF INJURY!
► The UV-C lamp
down sufficiently after use . Otherwise, there is risk of burns .
► The technical information data for the UV-C lamp
section Technical data .
♦
Use a screwdriver to loosen the screw on the cover
and remove the cover
♦
Pull the UV-C lamp
♦
Insert a new UV-C lamp
♦
Put on the cover
Storage
♦
Store the appliance in a clean and dry place away from direct sunlight .
Disposal of the appliance
NOTE
► Remove the UV-C lamp
of it separately from the appliance .
The adjacent symbol of a crossed-out wheelie bin means that this appliance is
subject to Directive 2012/19/EU . This directive states that this appliance may
not be disposed of in normal household waste at the end of its useful life, but
must be brought to a specially set-up collection point, recycling depot or disposal
company .
This disposal is free of charge for the user . Protect the
environment and dispose of this appliance properly .
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product .
The product is recyclable, subject to extended producer responsibility and is
collected separately .
SMS 300 A1
gets hot during use . Allow the UV-C lamp
8
.
e
out of the plug connections .
8
into the plug connections .
8
and fix it back in place with the screw .
e
before disposing of the appliance and dispose
8
to cool
8
can be found in the
8
of the UV-C lamp
e
GB │ IE │ 33
8
■