Viewing The Recorded Scene (Edit Search) - JVC GY-DV300 Manuel D'instructions

Viewing the Recorded Scene (Edit Search)

SHOOTING
The recorded scene can be checked and the position for recording the next scene can be searched in the
recording-standby mode.
Screen indication during edit
search
The VTR mode is indicated as
ED.FWD or ED.REV on the LCD
screen and the viewfinder screen
during edit search.
ED. FWD
ED.FWD : Forward search
ED.REV : Reverse search
Enter the recording-standby mode
To advance the tape in forward direction.
1.
Press the FWD button. Playback is performed at normal speed
as long as the button is pressed down.
2.
When the FWD button is released, the unit returns to the
recording-standby mode.
To rewind the tape in reverse direction.
1.
Press the REV button. Playback in reverse direction is performed
at normal speed as long as the button is pressed down.
2.
A
When the REV button is released, the unit returns to the
recording-standby mode.
Memo:
● When the recording speed mode (SP/LP) setting differs from
the setting used for the part already recorded on the tape, the
picture may be disturbed at the switching point.
● When executing Edit Search on a DVM80 tape and the
remaining amount of tape is 3 minutes or less, "INVALID
OPERATION" is displayed in order to protect the tape and Edit
Search does not function. "INVALID OPERATION" is displayed
if Edit Search is attempted in the condition in which the
remaining tape amount is not indicated.
● During search, block noise may appear on the screen or the
image may freeze.
Likewise, the SP/LP indication may not be displayed correctly.
FWD button
BAR
AW
FWD
REV
REV button
E-59