Specifications; Stihl Bga 45 Blower; Stihl Lk 45 Charging Cable; Noise And Vibration Data - Stihl BGA 45 Notice D'emploi

English
Condition LEDs on blo‐
wer
Blower runtime is
too short
Blower is not 3 LEDs glow
being charged. red.

18 Specifications

18.1

STIHL BGA 45 Blower

– Weight: 2.2 kg
– Air speed with nozzle mounted: 38 m/s
– Battery technology: Lithium-ion
– Voltage: 18 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Permissible temperature range for operation
and storage: 0°C up to 50°C
If the blower is used at temperatures higher than
30°C, the battery runtime may be shortened and
the blower's performance reduced.
Consult www.stihl.com/battery-life for the respec‐
tive running time.
18.2

STIHL LK 45 Charging Cable

– Voltage: 100-240 V, 50‑-60 Hz
– Power rating: 14.6 W
– Charge current: 0.65 A
– Permissible temperature range for operation
and storage: 0°C up to 40 °C
For charging times see www.stihl.com/charging-
times.
18.3

Noise and Vibration Data

K-value for sound pressure level is 2 dB(A). K-
value for sound power level is 2 dB(A). K-value
for vibration level is 2 m/s².
STIHL recommends that you wear hearing pro‐
tection.
– Sound pressure level L
to EN 50636‑2‑100: 76 dB(A)
– Sound power level L
EN 50636-2-100: 87 dB(A)
– Vibration measurement a
ing to EN 506362100; control handle: 3.2 m/s²
The vibration values quoted above have been
measured according to a standardized test pro‐
cedure and may be used to compare electric
26
Cause
The blower is not fully
charged.
Normal blower life has
been exceeded.
Blower is too hot.
Malfunction in blower
or charging cable.
measured according
pA
measured according to
wA
measured accord‐
hv
Remedy
► Fully charge the blower.
► Replace the blower.
► Remove the activation key.
► Allow blower to cool down.
► Remove the activation key.
► Contact a STIHL servicing dealer for
assistance.
power tools. Depending on the type of usage,
the vibrations that actually occur may differ from
the values quoted. The vibration values quoted
may be used for an initial assessment of the
user's exposure to vibrations. The actual expo‐
sure to vibrations has to be estimated. This proc‐
ess may also take into account times during
which the electric power tool is switched off and
times during which it is switched on but running
off load.
Information on compliance with Vibration Direc‐
tive 2002/44/EC is available at www.stihl.com/
vib.
18.4 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
19 Spare Parts and Accesso‐
ries
19.1

Spare parts and accessories

These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
18 Specifications
0458-719-9621-B