Specifications - Stihl BGA 85 Notice D'emploi

English
Definitions
1. Battery Compartment
Accommodates the battery in the
unit.
2. Control Handle
The handle of the blower held by the
operator´s hand.
3. Trigger Switch Lockout
Must be depressed before the
trigger switch can be activated.
4. Trigger Switch
Switches the motor on and off and
controls the speed of the motor.
5. Retaining Latch
Locks or unlocks the trigger switch.
6. Blower Tube
Directs airstream.
7. Nozzle
Mounted on blower tube, directs
airstream.
8. Intake Screen
Fits over the intake opening and
reduces the risk of direct contact
with the axial fan, which is located
under the screen.
9. Battery Locking Tabs
Secure the battery in the unit.
10. Battery
Supplies the motor with electrical
power.
11. Light Emitting Diodes (LEDs) on
Battery
Indicate the state of charge and
operating condition of the battery.
16
12. Push Button
For activating light emitting diodes
(LED) on battery.
13. Charger
Charges the battery.
14. Light Emitting Diode (LED) on
Charger
Indicates charger operating mode
and certain problems.
15. Power Supply Cord
Supplies electric current to charger.

Specifications

Battery
Type: Lithium-ion
Designation: AP, AR
The machine may be operated only with
original STIHL AP and AR rechargeable
batteries.
Power tool running time is dependent on
the energy content of the battery.
STIHL AP series and AR series
rechargeable batteries may be charged
only with original STIHL AL series
chargers.
Charger
AL 100
Power supply: 120 V / 60 Hz
Rated current: 1.3 A
Power consumption: 75 W
Charge current: 1.6 A
Insulation: II, E (double
insulated)
AL 300
Power supply: 120 V / 60 Hz
Rated current: 4.7 A
Power consumption: 330 W
Charge current: 6.5 A
Insulation: II, E (double
insulated)
BGA 85