Maintenance; Notes - Riester e-scope Mode D'emploi

4.7 Spare parts Replacement lamps
for e-scope Ophthalmoscope
XL 2.5 V, pack of 6, Art.-No.: 10605
LED 3.7 V, Art.-No.: 14051
https://www.riester.de/productdetails/d/e-scoper-pocket-instrments/e-scoper-otos-
copes/
for e-xam
XL 2,5 V, Pack of 6, Art.-No.: 11178
LED 2,5 V Art.-No.: 12320
https://www.riester.de/en/productdetails/d/penlights/e-xam-penlight/

5. Maintenance

These instruments and their accessories do not require any specific maintenance.
Should an instrument have to be examined for any specific reason whatsoever, please
return it to the Company or an authorised Riester dealer in your area. Addresses to
be supplied on request.

6. Notes

Ambient temperature:
Relative Humidity:
Storage location:
Relative Humidity:
CAUTION:
There is possibly a risk of ignition if the equipment is operated in the presence of
flammable mixtures of substances with air or with oxygen, nitrous oxide and anes-
thetic gases. Safety information according to the international safety standard IEC
60601-1 Electrical safety of medical devices: Opening of the handle in patient vicinity
and simultaneously touching the batteries and patient is not allowed.
7. Electromagnetic compatibility
Accompanying documents according to IEC 60601-1-2, 2014, Ed. 4.0
Attention:
Medical electrical equipment is subject to special precautions regarding electroma-
gnetic compatibility (EMC).
Portable and mobile radio frequency communication devices can affect medical elec-
trical equipment. The ME device is for operation in an electromagnetic environment
for home health care and intended for professional facilities such as industrial areas
and hospitals.
The user of the device should ensure that it is operated within such an environment.
Warning:
The ME device may not be stacked, arranged or used directly next to or with other de-
vices. When operation is required to be close to or stacked with other devices, the ME
device and the other ME devices must be observed in order to ensure proper operation
within this arrangement. This ME device is intended for use by medical professionals
only. This device may cause radio interference or interfere with the operation of nearby
devices. It may become necessary to take appropriate corrective measures, such as
redirecting or rearranging the ME device or shield.
The rated ME device does not exhibit any basic performance features in the sense of
EN60601-1, which would present an unacceptable risk to patients, operators or third
parties should the power supply fail or malfunction.
Warning:
Portable RF communications equipment (radios) including accessories, such as an-
tenna cables and external antennas, should not be used in closer proximity than 30
cm (12 inches) to parts and cables of the e-scope
specified by the manufacturer. Failure to comply may result in a reduction in the de-
vice's performance features.
0 ° to +40 ° C
30 % to 70 % noncondensing
-10° to +55°
10 % to 95 %
instrument head with hand grips
®
17