Accessories; General Conditions Of Sales And Delivery - oventrop Regudis W-HTF Mode D'emploi

Illustr. 8.5 System illustration

9 Accessories

Flow limiter
Draw off quantity limitation 12 l/min:
Draw off quantity limitation 15 l/min:
Draw off quantity limitation 17 l/min:
Ball valve connection set:
Ball valve connection set
high temperature circuit:
Cabinet:
Cabinet "long model":
Surface-mounted cabinet:
Surface-mounted cabinet (long model):
Derivative temperature control set:
Connection set stainless steel
distributor/collector:
Plug for temperature sensor
(heat meter):
Electric sensor attached to the pipe:
(With hidden temperature setting control range 20-90 °C)
The complete range of accessories can be found in
the catalogue or
www.oventrop.com.
28
1349980
1349981
1349982
1341180
1341183
1341170
1341175
1341071
1341198
1341188
1341187
1349054
1143000
on the internet under
10 Maintenance
To guarantee a perfect operation of the dwelling
station, it is recommended to have it maintained by a
specialist heating company at least once a year.
The following work should be done:
– Leakage test:
– Test opening of the PM controller (illustr. 5.1)
– of all valves and fittings.
– Cleaning of strainers (illustr. 8.1).
– Functional control:
– Check closing function of the PM controller: The
heat exchanger has to cool down after drawing
off.
– Check isolating valves.
– Check flow and draw off temperature.
11 General conditions of sales
and delivery
Oventrops general conditions of sales and delivery
valid at the time of supply are applicable.