Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
o
Press and hold the "-" or "+" control to decrease or increase the time on the timer
by 10 minutes.
o
If the set time exceeds 99 minutes, the timer will automatically return to 0 minutes.
Setting the timer to turn one cooking zone off
Touch the "-" or "+" of the corresponding
cooking zone you want to set the timer for.
Set the time by touching the "-" or "+" con-
trol on the timer.
By touching the "-" and "+" together, the
timer is cancelled, and "--" will show in the
minute display.
When the time is set, the timer will begin to
count down immediately. The display will
show the remaining time and the timer in-
dicator will flash for 5 seconds.
When the cooking timer expires, the corre-
sponding cooking zone will be switched off
automatically; The display will show "H"
which means hot.
Note:
o
The red dot next to the power level indicator will illuminate indicating that a zone is
selected.
If you want to change the time after the timer is set, you have to start again from
o
step 1.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
Set one zone
99
Publicité
Table des Matières
