How To Use; Start Cooking; Finish Cooking - Rotel CERAMICHOB5700CH G5700CH Mode D'emploi

• HOW TO USE

Start cooking

o After the device is switched on, the buzzer beeps once, all the indicators light up for
1 second then go out, indicating that the ceramic hob has entered standby mode.
Touch the ON/OFF
All the indicators show "-"
Place a suitable pan on the cooking zone that you wish to
use.
- Make sure the bottom of the pan and the surface of
the cooking zone are clean and dry.
Select a heat setting by touching the "-" or "+" control.
- If you don't choose a heat setting within 1 minute, the
ceramic hob will automatically switch off. You will
need to start again at step 1.
- You can modify the heat setting at any time during
cooking.
- By holding down either of these buttons, the value
will adjust up or down.

Finish cooking

Turn the cooking zone off by scrolling down to " 0 "
or touching the "-" and "+" control together.
Turn the whole cooktop off by touching the
ON/OFF control.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
control.
96