Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Before locating the fixing brackets
o
The unit should be placed on a stable, smooth surface (use the packaging). Do not
apply force onto the controls protruding from the hob.
o
Fix the hob on the work surface by screwing four brackets on the bottom of the hob
(see picture) after installation.
A
B
screw
bracket
o
Adjust the bracket position to suit different thicknesses of work surface.
Hob
Bracket
o
Under no circumstances should the brackets come into contact with the inner sur-
faces of the worktop after installation (see picture).
Caution
o
The ceramic cooker hob must be installed by qualified personnel or technicians. We
have professionals at your service. Please never conduct the operation by yourself.
The ceramic cooker hob shall not be mounted to cooling equipment, dishwashers
o
and rotary dryers.
The installation of the ceramic cooker hob must ensure optimum heat radiation to
o
enhance the reliability of the device.
o
The wall and induced heating zone above the work surface must be able to with-
stand heat.
o
To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
C
D
screw hole
base
Table
108
Hob
Table
Bracket
Publicité
Table des Matières
