Battery Replacement - koban KPA-01T Mode D'emploi

EN
7 MAINTENANCE
WARNING: to avoid electrical shock disconnect the meter from any circuit, remove the test leads
from the input terminals, and turn OFF the meter before opening the case. Do not operate with an
open case.
7.1 Cleaning the storage
Periodically wipe the case with a clamp cloth and mild detergent do not use abrasives or solvents.
It the meter is not to be used for 60 days or more, remove the battery and store it separately.

7.2 Battery Replacement

- Remove the Philips head screw that secures the rear battery door.
- Open the battery compartment.
- Replace the 9V battery.
- Secure the battery compartment.
7.3 Temperature Probe Replacement
NOTE: To use a Type K thermocouple probe that is terminated by a subminiature (flat blade j con-
nector, a subminiature-to-banana plug adaptor is required.
KPA-01T
CLAMP METER TRMS
37 / 50