Service And Repairs; Protecting The Environment - DeWalt DCE080RS Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 46
Troubleshooting
GB
Laser Troubleshooting
Height of Instrument Alert
The DCE080RS/GS has a built-in alarm feature that alerts the
operator if the unit is disturbed after the unit has self-leveled. The
laser unit will stop rotating, the control panel LED indicator light will
flash, and the beeper will sound.
Reset the laser unit so you can continue to use it:
1.
Press the power button
power LED indicator light will no longer be illuminated.
2.
Press the power button
Detector Troubleshooting
Detector will not Turn on
1.
Make sure the Li-Ion battery is charged.
If the detector is very cold, allow it to warm up in a heated area.
2.
3.
Press the power button (Figure
4.
If the detector still does not turn on, take the detector to
a D
WALT service center.
E
Detector Makes no Sound
Make sure the detector is on.
1.
2.
Press the volume button (Figure
to low, to mute. Make sure the speaker icon appears with two
half circles (Figure
3.
Make sure the rotary laser is spinning and that it is emitting
a laser beam.
If the detector is still not making any sound, take it to a D
4.
service center.
Detector Emits Sound but Does Not Display
If the detector is very cold, allow it to warm up in a heated area.
1.
2.
If the LCD display window is still not functioning, take the
detector to a D
WALT service center.
E
26
for 3 sec.to turn the laser off. The
to turn the laser back on again.
) to turn the detector on.
F 1
). It will toggle from high,
F 4
).
F
10

Service and Repairs

Laser Service
Note: Disassembling the laser level will void all warranties on the
product.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment should be performed by authorized service centers.
Service or maintenance performed by unqualified personnel may
result in a risk of injury. To locate your nearest D
center, go to www.2helpU.com.
Detector Service
Except for batteries, there are no user serviceable parts in the Digital
Laser Detector. Do not disassemble the unit. Unauth orized tampering
with the laser detector will void all warranties.

Protecting the Environment

Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials. Please
recycle electrical products and batteries according to local provisions.
Further information is available at www.2helpU.com.
Batteries
When disposing batteries, think of the protection of the environment.
Check with your local authorities for an environmentally safe way of
battery disposal.
WALT
E
WALT service
E

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dce080gs

Table des Matières