Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7
Operation
7.1
Switching the product on and off
1. Press the function key to switch on the display of the control unit.
- The control unit automatically switches off approximately 2
after the last time a key was pressed. The display shows OFF.
In this mode, the battery is not discharged. By pressing the function key, you
switch on the control unit for another 2
7.2
Display formats
Keep pressing the function key to select one of the four available units for the
level:
•
Indication of volume in litres
- The arrow at the bottom of the display points to Litres
•
Indication of volume in m³
- The arrow at the bottom of the display points to m³
•
Indication of volume in % of total contents
- The arrow at the bottom of the display points to %
•
Indication of liquid level in mm
- The arrow at the bottom of the display points to FH
Operation
1
/
2
minutes and the level is indicated.
DIT 10
EN
1
minutes
/
2
22
Publicité
Table des Matières
