Recording With Clock; Hold-Record-Pause: Pause The Recording - Chauvin Arnoux F 25 Mode D'emploi

Return to the current value
Press this button a fifth time: AVG disappears.
The digital display gives the current value.
The clamp is still in record mode: RECORD is still displayed
Stopping recording
Press and hold this button, to reset the clamp to normal mode: RECORD disappears.
The memories are reset to zero.

Recording with clock

The symbol displayed indicates that the recording configuration with the clock has been
selected. In this case the secondary display can display the time of max, min, average since
entering the RECORD mode.
- A first press on the Hz button displays the frequency
- A second press on the Hz button displays the time of the event considered, max, min or
average (see figure A).
Figure A: Time and date on the secondary display
MAX
e.g. the time since entering RECORD mode is 1 hour 52 minutes, with a min at the
th
8 minute and a max at the 36
NB: The time is reset to zero at each entry into RECORD mode.
HOLD - RECORD - PAUSE: Pause the recording
On RECORD mode, press the HOLD button to temporarily stop recording: PAUSE and HOLD
are displayed. These digital values recorded are frozen. The bargraph continues to give the
current RMS value.
MIN
Steady
th
minute.
5 0
AVG
Flashing