Safety Precautions - Chauvin Arnoux F 25 Mode D'emploi

ENGLISH
Thankyou for your confidence in choosing a Chauvin Arnoux instrument.
Before using your F25 Clamp-on Harmonic meter and in order to get the best service
from it:
READ carefully the advice and recommendations contained in this User manual.
RESPECT the safety precautions
International electric symbol:
Warning! Consult the User Manual before using your instrument.
Ensure that the F25 clamp is correctly closed.
Do not use the clamp on cables or conductors at a voltage of more than 600 V.
Do not use the clamp for currents above 1500 A (See page 49)
Ensure the correct positioning of the selector switch and, if applicable, the leads, before
any measurement.
Always disconnect the clamp from any electric source before changing the batteries.
Set the selector to OFF when you are not using the clamp.

SAFETY PRECAUTIONS

3 3