Make A Copy; Replace The Ink Cartridges - HP Photosmart C6200 All-in-One Série Guide D'utilisation

Chapter 3
4. If the HP All-in-One is connected to one or more computers on a network, do the
following:
a. Press OK to select Select Computer.
A list of the computers connected to the HP All-in-One appears on the display.
NOTE:
connection in addition to those connected through the network.
b. Press OK to select the default computer, or press
and then press OK.
The Scan To menu appears on the display, listing the applications on the selected
computer.
If the HP All-in-One is connected directly to a computer with a USB cable, proceed
to step 5.
5. Press OK to select the default application to receive the scan, or press
different application, and then press OK.
A preview image of the scan appears on your computer, where you can edit it.
6. Make any edits to the preview image, and then click Accept when you are finished.
Scan an original to a memory card
You can send the scanned image as a JPEG image to the memory card that is currently
inserted. This enables you to use the photo print options to print borderless prints and
album pages from the scanned image.
NOTE:
image only if the memory card is being shared across the network.
To save a scan to a memory card
1. Make sure your memory card is inserted into the appropriate slot on the HP All-in-One.
2. Load your original print side down on the right front corner of the glass.
3. Press Scan Menu on the control panel.
4. Press
NOTE:
The HP All-in-One scans the image and saves the file to the memory card in the JPEG
format.

Make a copy

You can make quality copies from the control panel.
To make a copy from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Press Start Copy Black or Start Copy Color to begin copying.

Replace the ink cartridges

Follow these instructions when you need to replace ink cartridges.
20 HP Photosmart C6200 All-in-One series
The Select Computer menu might list computers with a USB
If the HP All-in-One is connected to a network, you can access the scanned
to highlight Scan to Memory Card, and then press OK.
Alternatively, you can press Start Scan instead of OK.
to select a different computer,
to select a