Setting Spool Pins; Removing Or Inserting The Bobbin Case - Janome YC-482J-EC Manuel D'instructions

Setting Spool Pins

The spool pins are used for holding the spool of
thread in order to feed thread to the machine.
To use, pull up the spool pin. Push down for
storage.

Removing or Inserting the Bobbin Case

Open the hook cover.
q Hook cover
q
Raise the needle by turning the handwheel toward
you.
Take out the bobbin case by holding the latch.
w Latch
w
When inserting the bobbin case, place the horn
e
into the recess of the hook race.
e Horn
12