Changing Needles; To Check The Needle; Thread And Needle Chart - Janome YC-482J-EC Manuel D'instructions

Table des Matières

Publicité

Changing Needles

Raise the needle by turning the handwheel
toward you and lower the presser foot.
z Loosen the needle clamp screw by turning it
counterclockwise.
Remove the needle from the clamp.
x Insert the new needle into the clamp with the
flat side away from you.
When inserting the needle into the clamp,
push it up as far as it will go and tighten the
clamp screw firmly with the screwdriver.

To check the needle

Place the flat side of the needle on something flat
(needle plate, glass etc.). The clearance between
the needle and flat surface should be consistent.
Never use a bent or blunt needle.

Thread and Needle Chart

* In general, fine threads and needles are used
for sewing thin fabrics, and thicker threads and
needles are used for sewing heavy fabrics.
* Always test thread and needle size on a small
piece of the fabric which will be used for actual
sewing.
* Use the same thread for needle and bobbin.
* When sewing stretch, very fine fabrics and
synthetics,use a BLUE TIPPED needle.
The blue tipped needle effectively prevents
skipped stitches.
Fabrics
Crepe de Chine, Voile, Fine Silk
Light
Lawn, Organdy,
weight
Georgette,
Tricot
Linens, Cotton, Piqué, 50 silk
Medium
weight
Serge, Double Knits,
Percale
Denim, Tweed,
Heavy
Gabardine,
weight
Suiting, Drapery and
Upholstery Fabric
10
Needle Size
Thread
9
Fine Cotton
or
Fine Synthetic
11
Fine Cotton
Covered
Polyester
11
50 to 80 Cotton
or
50 to 60
14
Synthetic
Cotton Covered
Polyester
50 silk
14
or
40 to 50 Cotton
16
40 to 50
Synthetic
Cotton Covered
Polyester

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tjc-150

Table des Matières