Setting Spool Pins; Removing Or Inserting The Bobbin Case - Janome 2212 Livret D'instructions

Janome 2212 Instruction Manual
www.toews.com

Setting Spool Pins

The spool pins are used for holding the spool of thread in
order to feed thread to the machine.
To use, pull up the spool pin. Push down for storage.

Removing or Inserting the Bobbin Case

Open the hook cover.
Hook cover
1
1
Raise the needle by turning the handwheel toward you.
Take out the bobbin case by holding the latch.
Latch
2
2
When inserting the bobbin case, place the horn into the
3
recess of the hook race.
Horn
3
14
2212 Owners Manual/ User Guide