Hach TU5300 sc Manuel D'utilisation Simplifié page 3

Table of Contents
1 Additional information
2 Specifications on page 3
3 General information
4 Installation on page 10
5 User navigation on page 21
Section 1 Additional information
An expanded user manual is available on the manufacturer's website.
Section 2 Specifications
Specifications are subject to change without notice.
Specification
Measurement method
Primary compliance
method
Enclosure
IP rating
Dimensions (W x D x H)
Weight
Power requirements
Protection class
Pollution degree
Overvoltage category
Environmental
conditions
Operating temperature
Storage temperature
Humidity
Sensor cable length
Laser
Optical light source
1
Water drops, puddles or runlets that will not damage the instrument may be in the inner of the
enclosure.
on page 3
on page 5
Details
Nephelometry with scattered light collected at a 90-degree angle to the
incident light and 360 degrees around the sample vial
DIN EN ISO 7027
Material: ASA Luran S 777K / RAL7000, TPE RESIN Elastocon
Thermoplastic Elastomer TPS-SEBS (60 Shore) and stainless steel
Electronic compartment IP55; process head/Automatic Cleaning Module
attached to the instrument and all of the other functional units IP65
268 x 249 x 190 mm (10.6 x 9.8 x 7.5 in.)
Instrument with the process head: 2.7 kg (6.0 lb); Instrument with the
optional automatic cleaning module: 5.0 kg (11.0 lb)
12 VDC (+2 V, –4 V), 14 VA
III
2
II
Indoor use
0 to 50 °C (32 to 122 °F)
–40 to 60 °C (–40 to 140 °F)
5 to 95% relative humidity, non-condensing
TU5x00 sc without Automatic Cleaning Module or flow sensor: 50 m
(164 ft); TU5x00 sc with Automatic Cleaning Module: 10 m (33 ft)
Class 1 laser product: Contains a non user-serviceable class 1 laser.
850 nm, maximum 0.55 mW
6 Operation on page 21
7 Calibration on page 21
8 Verification on page 21
9 Maintenance on page 21
10 Troubleshooting on page 29
®
STK40,
1
English 3