Hach TU5300 sc Manuel D'utilisation Simplifié page 9

The TU5300 sc and the TU5400 sc turbidimeters are used with an SC controller to measure low-
range turbidity mostly in finished drinking water applications. Refer to
The TU5300 sc and the TU5400 sc turbidimeters measure scattered light at an angle of 90° in a 360°
radius around the axis of the incident light beam.
An optional RFID module and an automatic system check option are available
shown in Figure 1. The RFID module lets process and laboratory turbidity measurements be easily
compared. A description of the automatic system check option is given in the expanded user manual
on the manufacturer's website.
PROGNOSYS predictive diagnostic software is available for the TU5300 sc and TU5400 sc
turbidimeters. To use PROGNOSYS, connect the turbidimeter to an SC controller with
PROGNOSYS.
Instructional videos are available in the support section of the manufacturer's website.
For the accessories, refer to the expanded user manual on the manufacturer's website.
Figure 1 Product overview
1 Programmable button
2 Status indicator light
3 RFID module indicator (optional)
4 Cleaning lid screws (3x)
5 Cleaning lid
6 Process head
7 Sample inlet
8 Sample outlet
4
The RFID module and automatic system check option is only available at the time of purchase.
5
Shows the instrument status. Refer to the expanded user manual on the manufacturer's website
for more information.
5
Figure
9 Vial compartment
10 Overflow drain
11 Process head (open)
12 Process head (closed)
13 Channels for cables
14 Extension connector for accessories
15 Sensor cable
1.
4
. The RFID module is
English 9