Operation - SilverCrest EDS-SSM 600 B2 Mode D'emploi

Operation

WARNING! RISK OF INJURY!
► Foodstuff s should not be too hot. Squirting contents may cause scalding.
When you have assembled the hand mixer:
1) Insert the plug into a mains power socket.
2) Press and hold the switch 2 to process foodstuff s at the standard speed.
Slide the speed regulator 1 in the direction of "5" to increase the speed.
Slide the speed regulator 1 in the direction of "1" to reduce the speed.
3) Press and hold the turbo-switch 3 to process foodstuff s at a higher speed.
By pressing the turbo-switch 3 the maximum processing speed is available
immediately.
4) When you have completed the processing of the foodstuff s, simply release
the switch.
NOTICE
► Should unusual noises occur during operation, such as squeaking or the
like, apply a little neutral cooking oil to the drive shaft of the hand mixer:
EDS-SSM 600 B2
GB
49