Items Supplied; Disposal Of The Packaging - SilverCrest EDS-SSM 600 B2 Mode D'emploi

Items supplied

GB

Disposal of the packaging

46
The appliance is delivered with the following components as standard:
▯ Hand Blender
▯ Wall bracket
▯ 2 x Plugs
▯ 2 x Screws
▯ Operating instructions
1) Remove all parts of the appliance and these operating instructions from the
box.
2) Remove all packing material.
3) Clean all parts of the appliance as described in the chapter "Cleaning".
NOTICE
► Check the contents to make sure everything is there and for visible damage.
► If the contents are incomplete, or have been damaged due to defective
packaging or transportation, contact the Service Hotline (see chapter
Service).
The packaging protects the appliance from transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material
and reduces generated waste. Dispose of packaging material that is no longer
needed according to the regionally established regulations.
NOTICE
► If possible preserve the appliance's original packaging during the warranty
period so that in the case of a warranty claim you can package the appli-
ance properly for return.
EDS-SSM 600 B2