Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
All manuals and user guides at all-guides.com
6.
Connect the appliance via the power cord to the power outlet
of the vehicle electrical system.
7.
Switch on the appliance via the ON-switch on the handle. The
indicator lamp will light up.
8.
When the water is boiling the automatic boil dry circuit swit-
ches off the appliance.
9.
To pour out water, press the lever on the top of the lid down-
wards.
10. Repeat this procedure three times to eliminate all manufactu-
ring residues.
11. Caution: Wait approx. 10 minutes until the appliance is suf-
ficiently cooled between each boiling cycle.

OPERATION

1.
Open the lid. To do this, pull the lever on the top of the lid
upward, and take off the lid. Fill the appliance with fresh, cold
water.
2.
Fill with a minimum of 0.2 l and maximum of 0.5 l water.
3.
Ensure that the lid is closed correctly.
4.
Connect the appliance via the power cord to the power outlet
of the vehicle electrical system.
5.
Switch on the appliance via the ON-switch on the handle. The
indicator lamp will light up.
6.
Caution:
The automatic shut-off function only works if the lid is properly
closed.
24
Caution: Never use the appliance when the car
is in motion. Ensure that the appliance is stable
and safe!
CAUTION:
If the kettle is overfilled, boiling water can splash
out. Danger of appliance damage and danger of
burn injury/scalding.

Publicité

Table des Matières
loading

Table des Matières