Operation - Unold 18580 Notice D'utilisation

increments between 60°C and 100°C. The maximum temperature at which the
water can be kept warm is the boiling temperature.
There is no factory preset for the temperature at which the water is kept warm.
The keep warm function is ended automatically when the kettle is removed from
the base.
Through this function you can ensure that your water also still has the desired
temperature, even if you do not use it immediately after concluding the boiling
process.
use - heatinG or BoilinG Water
1. Connect the base to the power
supply (220–240 V~, 50/60 Hz)
via the power cord.
2. All indicator lights briefly light up
and indicate that the appliance is
ready for operation.
3. Remove the kettle from the base.
4. Press the "Unold" opening button
in the centre of the lid. The lid
is unlocked and opens automati-
cally.
5. Fill the kettle with the desired
quantity of clean, cold water. At
least 0.25 litres of water must be
filled, the maximum fill quantity
is 1.2 litres of water.
6. Caution: If the kettle is overfilled,
boiling water can splash out and
cause burn injuries!
7. Close the lid by pressing lightly.
8. Place the kettle so it is straight on
the base, to ensure that contact is
established with the base.
9. Check to make sure that the appli-
ance is stable.
10. Caution: If the kettle is not cor-
rectly seated the appliance can-
not be switched on.
11. Press the "
perature display 100°C will light
up to indicate that the boiling
process has started. The indicator
light in the interior of the appli-
ance will be illuminated.
12. During the boiling process it is
possible to select a different tem-
perature.
13. If you desire a different tempera-
ture select it via the arrow keys.
You can select 60°C, 70°C, 80°C,
90°C and 100°C.
All manuals and user guides at all-guides.com
" button The tem-
14. When the water has reached the
desired temperature, the automa-
tic control shuts off the appliance.
15. Naturally you can also press the
" " button again if you want
to end the process earlier. In this
process the currently set tempera-
ture will saved for the next boiling
process until the base is discon-
nected from the mains supply.
16. Please ensure that you always
switch off the appliance via the
" " button, before you take it
off of the base.
17. Caution: The automatic tempera-
ture control only functions when
the lid is properly closed.
18. If you want to heat up water again,
let the appliance cool for several
minutes.
Boiling water can cause scal-
ding. therefore, please handle
the appliance with care when it
contains hot water.
19. The appliance
dry protection. When operated
without water or with excessive
scaling, the appliance shuts off
automatically. If this happens,
please allow the appliance to
cool off briefly before filling it
with water again or descale the
appliance as described in the
chapter "Descaling".
features boil
15