Energy Consumption Indicator; Power Manager - Bosch NITP069SUC Mode D'emploi

To access the basic settings:
The cooktop must be switched off.
Turn on the cooktop.
1.
Within10 seconds, touch the kitchen timer key for
2.
about 4 seconds.
The first four displays provide product information.
Touch the settings area to view the individual displays.
Product information
Customer service index (CSI)
FD number
FD number 1
FD number 2
Touching the kitchen timer key again takes you to the
3.
basic settings.
and light up as a default in the displays.
™‚ ‹
Touch the kitchen timer key repeatedly until the
4.
desired function is displayed.
Select the desired setting from the settings area.
5.
Touch the kitchen timer key for at least 4 seconds.
6.
The settings have been saved.
Quit basic settings
Turn the cooktop off with the main switch.

Energy consumption indicator

This function indicates the total amount of energy
consumed by this cooktop the last time it was used for
cooking.
Once switched off, the energy consumption in kWh is
displayed for 10 seconds, e.g.
The accuracy of the information displayed depends on
the voltage quality of the power supply, among other
factors.
Display
screen You can find out how to turn this function on in the
section on ~ "Basic settings"
‹‚
"š

Power Manager

Š† .
You can use the power manager to set the total power of
. the cooktop.
‹ †
The cooktop is preset at the factory. Its maximum
performance is specified on the rating label. You can use
the power manager to change the value in accordance
with the requirements for the relevant electrical
installation.
In order not to exceed this set value, the cooktop
automatically distributes the power available between the
cooking zones that are switched on.
As long as the power manager function is activated, the
output of a cooking zone may temporarily fall below the
nominal value. If a cooking zone is switched on and the
power limit is reached,
display for a short time. The appliance automatically
regulates and selects the highest possible power level.
For more information about how the total power of the
cooktop is changed, see section ~ "Basic settings"
. kWh.
‚ ‹‰
appears in the heat setting
¬
23