Bosch NITP069SUC Mode D'emploi page 20

Egg dishes
Fried eggs in butter
3
Fried eggs in oil
1
Scrambled eggs
2
Omelettes
4
Pancakes
4
French toast
4
Shredded raisin pancake
Miscellaneous
Toasting
5
Croûtons
2
Toasting almonds
6
Toasting nuts
6
Toasting pine nuts
6
Add oil (if necessary) and the food after the signal tone sounds. Turn if necessary.
1
Add oil (if necessary) and the food after the signal tone sounds. Stir regularly.
2
Add butter and the food after the signal tone sounds. Turn if necessary.
3
Add oil (if necessary) and the food after the signal tone sounds. Total cooking time per portion. Fry individually.
4
Add oil (rub into the food) and the food after the signal tone sounds. Turn if necessary.
5
Add the food after the signal tone sounds.
6
Setting procedure
Select the appropriate temperature setting from the table.
Place the empty cookware on the cooking zone.
Select the cooking zone. Touch auto chef.
1.
up in the cooking zone display.
20
4
é
Cookware Temperature
level
2
«
4
«
2
«
2
«
5
«
3
«
3
«
4
«
3
«
4
«
4
«
4
«
Within the next 10 seconds, select the required
2.
temperature setting from the settings range.
lights
The function has now been activated.
The temperature symbol flashes until the frying
é
temperature is reached. A signal sounds and the
temperature symbol goes out.
Once the frying temperature has been reached, add
3.
the fat and then the food to the pan.
Note: Turn the food so that it does not burn.
Switching off AutoChef
Select the cooking zone and set it to
range. The cooking zone switches itself off and the
residual heat indicator appears.
Total frying time after the
signal tone sounds (min)
2 - 6
2 - 6
4 - 9
3 - 6
1.5 - 2.5
4 - 8
10 - 15
4 - 6
6 - 10
3 - 15
3 - 15
3 - 15
®
. in the settings
‹ ‹