Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Symbol Function
•'ˆ
Wi-Fi signal strength
Not connected to home network (Wi-Fi).
‹
Signal strength 1 (poor)
‚
Signal strength 2 (moderate)
ƒ
Signal strength 3 (good)
„
•'‰
Connection to Home Connect server
Not connected.
‹
Connected.
‚
* Basic setting
Notes
The
setting is only displayed if the appliance is
•'ƒ
▯
connected to the home network.
The
setting is only displayed if the appliance has
•'„
▯
once connected to a network.
The
setting is only displayed if an update is
•'†
▯
available.
The
setting is only displayed if Customer Service
•'‡
▯
is attempting to connect to the appliance. You can end
this at any time after granting access.
The
and
settings are only displayed if there
•'ˆ
•'‰
▯
is a connection to Wi-Fi.
Deactivating Wi-Fi
If Wi-Fi has been activated, you can use the
Home Connect functions.
Note: In networked standby mode, your appliance
requires a maximum of 2 W.
Turn on the cooktop.
1.
Touch and hold the kitchen timer key for 4 seconds.
2.
The product information is displayed.
Touch the kitchen timer key repeatedly until
3.
are displayed alternately.
„
lights up in the cooking position display.
‚
Set the
value on the control panel.
‹
4.
This deactivates Wi-Fi; the
control panel.
26
•'
symbol will go out on the
D
Disconnecting from the Network
You can disconnect your cooktop from the network at
any time.
Note: If your cooktop is disconnected from the network,
it is not possible to operate it using Home Connect.
Turn on the cooktop.
1.
Touch and hold the kitchen timer key for 4 seconds.
2.
The product information is displayed.
Touch the kitchen timer key repeatedly until
3.
‚
are displayed alternately.
lights up in the cooking position display.
„
Set the
value on the control panel.
‹
4.
This disconnects the appliance from your home network;
the
symbol will go out on the control panel.
D
Connecting to the network
Turn on the cooktop.
1.
Touch and hold the kitchen timer key for 4 seconds.
2.
The product information is displayed.
Touch the kitchen timer key repeatedly until
3.
‚
are displayed alternately.
lights up in the cooking position display.
‹
On the control panel
4.
and
set the "Connect automatically"
or the "Connect manually"
Follow the instructions as per ~ "Automatic
5.
Registration in the Home Network" or ~ "Manual
Registration in the Home Network".
Connect to App
If the Home Connect app is installed on your mobile
device, you can connect it to your cooktop.
Notes
The appliance must be connected to the network.
▯
The app must be open and be set up.
▯
Turn on the cooktop.
1.
Touch and hold the kitchen timer key for 4 seconds.
2.
The product information is displayed.
•'
C o n n e c t i n g t o t h e n e t w o r k
•'
value or
‚
ƒ
value.
and
and
Publicité
Chapitres
Table des Matières
