Functional Description; Intended Use; Product Features; English | 5 - Bosch GSC 2,8 Professional Notice Originale

OBJ_BUCH-610-001.book Page 5 Thursday, January 31, 2008 1:43 PM
4) Power tool use and care
a) Do not force the power tool. Use the cor-
rect power tool for your application. The
correct power tool will do the job better and
safer at the rate for which it is designed.
b) Do not use the power tool if the switch
does not turn it on or off. Any power tool
that cannot be controlled with the switch
is dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any adjust-
ments, changing accessories, or storing
power tools. Such preventive safety mea-
sures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for misalign-
ment or binding of moving parts, break-
age of parts and any other condition that
may affect the power tool's operation. If
damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Prop-
erly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories, tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from
those intended could result in a hazardous
situation.
5) Service
a) Have your power tool serviced by a quali-
fied repair person using only identical re-
placement parts. This will ensure that the
safety of the power tool is maintained.
Bosch Power Tools
All manuals and user guides at all-guides.com
Power Tool-specific
Safety Warnings

Functional Description

While reading the operating instructions, unfold
the graphics page for the tool and leave it open.

Intended Use

The power tool is intended for cutting sheet
metals without loss due to metal chips. It is suit-
able for curved and straight cuts.

Product Features

The numbering of the product features refers to the
illustration of the power tool on the graphics page.
1 On/Off switch
2 Auxiliary handle
3 Screw for auxiliary handle
4 Auxiliary-handle mount
5 Adjustment screw, upper cutter
6 Striker
7 Upper cutter
8 Fastening screw for upper cutter
9 Bottom cutter
10 Cutting base
11 Adjustment screw, bottom cutter
12 Fastening screw for bottom cutter
13 Setting gage
Illustrated or described accessories are not included
as standard delivery.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Always wait until the power tool has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Do not use the power tool with a damaged
cord. Do not touch the damaged cord and
pull the plug from the outlet when the cord
is damaged while working. Damaged cords
increase the risk of an electric shock.
Read all safety warnings and all in-
structions. Failure to follow the warn-
ings and instructions may result in elec-
tric shock, fire and/or serious injury.
1 609 929 N57 | (31.1.08)

English | 5