Selecting The Language - ABB ACS55 Guide De L'utilisateur

How to perform a guided start-up
To be able to perform the guided start-up, you need the Assistant control panel.
Before you start, ensure that you have the motor nameplate data on hand.
Apply input power. The control panel first asks if you
want to use the Start-up assistant.
OK
• Press (when
Start-up assistant.
EXIT
• Press if you do not want to run the Start-up
assistant.
• Press key
if you want to make the panel ask (or not ask) the
question about running the Start-up assistant again
the next time you switch on the power to the drive.
If you decided to run the Start-up assistant, the
display then asks you to select the language. Scroll
to the desired language with keys
SAVE
press to accept.
EXIT
If you press
The Start-up assistant now guides you through the
set-up tasks, starting with the motor set-up. Set the
motor data to exactly the same value as on the motor
nameplate.
Scroll to the desired parameter value with keys
and press
Start-up assistant.
Note: At any time, if you press
assistant is stopped and the display goes to the
Output mode.
The basic start-up is now completed. However, it
might be useful at this stage to set the parameters
required by your application and continue with the
application set-up as suggested by the Start-up
assistant.
POWER-UP
is highlighted) to run the
Yes
to highlight and then press
No

SELECTING THE LANGUAGE

, the Start-up assistant is stopped.
STARTING THE GUIDED SET-UP
SAVE
to accept and continue with the
EXIT
, the Start-up
Start-up and control with I/O 23
REM
Do you want to
use the start-up
assistant?
Yes
No
EXIT
OK
REM
Show start-up
assistant on
next boot?
Yes
No
EXIT
REM
9901 LANGUAGE
/ and
[0]
EXIT
REM
9905 MOTOR NOM VOLT
EXIT
/
REM
Do you want to
continue with
application setup?
Continue
Skip
EXIT
CHOICE
00:00
OK
CHOICE
00:00
OK
PAR EDIT
ENGLISH
00:00 SAVE
PAR EDIT
220 V
00:00 SAVE
CHOICE
00:00 OK