Use Of The Appliance; Using Accessories - Miele PRI 210 Mode D'emploi

Repasseuses professionnelles
Masquer les pouces Voir aussi pour PRI 210:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The rotary iron is only completely isolated from the electricity supply if switched off at
the circuit breaker.
Electrostatic charge can occasionally build up when using the rotary iron, depending on
the type of fabric and residual moisture.

Use of the appliance

The rotary iron must not be operated unsupervised.
People with reduced physical, sensory, or mental capabilities, or lack of experience and
knowledge, are only permitted to use the rotary iron under supervision or if they have been
shown how to use it in a safe way and can recognize and understand the dangers of such
use.
Children should be supervised in the vicinity of the rotary iron. Never allow children to
play with the rotary iron.
In the heated state and with the heater plate contacting the roller, there is a serious risk
of burning if you touch the edge of the heater plate on the laundry output side.
Do not set a higher ironing temperature than specified on the care label of the laundry.
The laundry could ignite if the ironing temperature is set too high.
When ironing double-layered laundry items, do not put your hands between the layers
when trying to stretch the item. There is a risk that you will not be able to move your hands
out of the way of the hot heater plate in time. This also applies to inserting your hands into
pockets whose open sides are facing the hot heater plate.
The flexible laundry feed mechanism for reverse laundry removal (optional) should only
be operated from the front.
Do not iron items with fringes, thin ties, straps, etc., on rotary irons with feed-in belts.
These could get tangled in the feed-in belts and cause a fault.
While using the rotary iron, keep your hands away from the areas between the side col-
umns and the roller. There is a danger of squashing your fingers in the rotating roller.
The room in which the rotary iron is being used should be sufficiently lit.
The rotary iron must be switched off when not in use.
Keep the work area around the rotary iron neat and tidy.
As a precaution fire suppression may be required. Check with local codes.
The installation and mounting of this rotary iron in non-stationary locations (for example,
on ships) should only be performed by specialized companies/specialists if they can guar-
antee the prerequisites for its safe use.
Country-specific safety regulations, standards, and safety requirements must be taken
into consideration.

Using accessories

Only approved genuine Miele accessories should be used with the rotary iron. Using
parts or accessories from other manufacturers will void the warranty, and Miele cannot ac-
cept liability.
en - IMPORTANT SAFETY INSTRUCTIONS
7

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Pri 214Pri 217

Table des Matières