Finger Guard - Miele PRI 210 Mode D'emploi

Finger guard

The finger guard is a safety feature that must be checked daily for proper functioning be-
fore startup.
 Risk of injury due to lack of finger guard function.
A malfunctioning finger guard function can lead to serious injury.
Shut down the rotary iron immediately.
Contact Miele Technical Service immediately.
Ensure that the rotary iron is not operated by another person and advise others of the
potential hazard.
The rotary iron will only switch to normal operating mode if the finger guard has been
pulled up slightly after switching on the rotary iron. Otherwise, the rotary iron will switch
off again after a short period of time.
Pull the finger guard up slightly while the  symbol is flashing.
If fingertips become trapped between the roller and the finger guard, the rotary iron will be
stopped immediately and the heater plate disengaged. At the same time, the  symbol will
light up continuously. Press the  button to switch the rotary iron back on.
en - Appliance overview
13